ALi ULi SATA Drivers

2004 · operating-system · driver · Windows · ALi Corporation

====================================================================== ALi ATA/RAID Controller and SATA/RAID controller driver Copyright 2003-2004 ALi Corporation. All Rights Reserved ====================================================================== ------------ INTRODUCTION ------------ This driver supports ALi ATA/RAID Controller and SATA/RAID controller. ------------------------- CONTENTS OF THIS DOCUMENT ------------------------- 1. Installation Instructions 2. Uninstallation Instructions 3. Driver File List 4. Driver Change List ---------------------------- 1. Installation Instructions ---------------------------- After the adapter is installed and recognized by computer, user can start the installation of driver. ---------------------------------------------------------------------- * Windows 98/ME Installation After Windows 98/ME is start-up, Windows system will automatically find the newly installed adapter and prompt user to install its driver. Follow these steps to install the driver: A) With installation setup program: 1. When the Found New Hardware Wizard windows appear, click Next button all the following windows. Then the driver will not be installed. 2. Double click setup.exe; 3. Confirm the following dialogue windows, and restart the computer when system prompt user to restart. B) Manual installation: 1. After the Add New Hardware Wizard window appears(PCI Mass Storage Controller), press Next button until the window with Specify a location item appears; 2. Insert the driver diskette, then select the Specify a location item and type in the driver loaction: A:\Win98_ME, then click on Next button to continue; 3. Confirm the following dialogue windows, and restart the computer when system prompt user to restart; 4. After rebooting, Windows will automatically find ALi SATA/RAID Controller and install its drivers. 5. Repeat step 1 to install ALi ATA/RAID Controller. ---------------------------------------------------------------------- * Windows NT4.0 Install driver under existing Windows NT4.0 A) With installation setup program: 1. Double click setup.exe; 2. Confirm the following dialogue windows, and restart the computer when system prompt user to restart. B) Manual installation: 1. Click Start-->Settings-->Control Panel, then double-click on the SCSI Adapters icon; 2. Within the follow-up window, select Driver item, then click on Add button; 3. Within the follow-up window, click on Have Disk...button, the "Install From Disk" window will appear. 4. Insert the driver diskette, and type in the path of driver location: A:\Win_NT in the above window, then click OK; 5. Within the follow-up window, select ALi SATA/RAID Controller item, then click OK; 6. Confirm the follow-up system prompts to finish the driver installation; 7. Repeat step 1, but select ALi ATA/RAID Controller at step 5; If both controllers are installed, go to next step; 8. When installation finshed, restart the computer. Install driver during WindowsNT4.0 installation 0. After you unpack driver, please copy files and subdirectory under SATA50XX to a floppy diskette (called driver diskette). Therefore, in root directory of floppy diskette you will see: (1) Files "disk1" and "txtsetup.oem", (2) Directory "win98_me", "win_nt", "win_2000", "win_xp" and related driver files in each directory. (please refer to "Driver File List" as below) 1. Press F6 key when the installation program prompt "Setup is inspecting your computer's hardware configuration"; 2. The installation will continue. Later, installation program will prompt user to press S key to specify other devices, then press S key; 3. Within the follow-up device type window, select Other, then press ENTER to confirm; 4. Installation program will prompt user to insert the driver diskette and then press ENTER to confirm; 5. Within the follow-up window, select ALi SATA/RAID Controller, then press ENTER to confirm; 6. The follow-up window will list out the devices to be installed, in which selected ALi controller(s) will be included; 7. Repeat step 2, but select ALi ATA/RAID Controller at step 5; If both controllers are installed, go to next step; 8. If users want to install other devices, please operate at this time. If all devices have been installed, go to next step 9. Press ENTER to confirm the devices to be installed and continue the installation of Windows NT4.0. ---------------------------------------------------------------------- * Windows 2000 Install driver under existing Windows 2000 After Windows 2000 is start-up, Windows system will automatically find the newly installed adapter and prompt user to install its driver. Please follow these steps to install the driver: A) With installation setup program: 1. When the Found New Hardware Wizard windows appear, click Cancel button to end the Wizard. 2. Double click setup.exe; 3. Confirm the following dialogue windows, and restart the computer when system prompt user to restart. B) Manual installation: 1. When the Found New Har