FSIOL-GS1 (FSIOL-GS2C) 32 bit smart driver disk

1995 · operating-system · driver · development · MS-DOS · Windows 3.x · LG-GoldStar

(The disk label mentions "FSIOL-GS1" while disk content mentions "FSIOL-GS2C") INSTALLATION GUIDE FOR FSIOL-GS2C 32-BIT ENHANCED IDE DRIVER LG-GoldStar Enhanced IDE Super IO Card comes with one set of software device drivers, the FSIOL-GS2C 32-bit ENHANCED IDE DRIVER. It is an intellegent software component for the Enhanced IDE Super IO Card. It acts as an accelerator and provides the following functions: (1) Auto-detection of harddisk configuration (2) Self-tuning of data transfer speed (3) Full 32-bit disk data IO handling (4) Fast speed multiple sector data access The ENHANCED IDE DRIVER is provided in a diskette and includes the following three files : CL32D.SYS Software Device Driver for MS-DOS 3.3/4.01/5.0/6.0 CL32W.386 Virtual Device Driver for MS Window 3.0/3.1 README Installation Guide for FSIOL-GS2C ENHANCED IDE DRIVER The design methodology of LG-GoldStar 32-bit ENHANCED IDE DRIVER is "Easy-to-install". Its installation procedure is as easy as just adding one statement in the system configuration or initialization file in your computer system. INSTALLATION PROCEDURE FOR MS-DOS _________________________________ 1. Copy the file CL32D.SYS from the diskette to your system disk (Usually C:) 2. Add one statement in your existing system configuration file (CONFIG.SYS) as follows : DEVICE=C:CL32D.SYS If you don't have your CONFIG.SYS file, please create a new one and type the above statement in the file. 3. Reboot your system and a prompt message will come out LG-Semicon Co., Ltd. COPYRIGHT 1994 All Rights Reserved. VESA LOCAL Enhanced IDE Driver Press F5 to skip driver installation other keys to continue... VL-BUS Clock = 50 MHz. All procedure is completed. You then work normally. INSTALLATION PROCEDURE FOR MS-WINDOW ____________________________________ 1. Copy the file CL32W.386 from the diskette to the Window SYSTEM sub-directory in your working disk drive. (Usually C:\WINDOWS\SYSTEM\) 2. Modify the Window System Initilization File (SYSTEM.INI), which is usually located in the sub-directory C:\WINDOWS\. 2.1 Search for [386Enh] section. Usually, you get 32BitDiskAccess=OFF device=*int13 device=*wdctrl 2.2 Change "OFF" to "ON" in the 1st statement. 2.3 Modify the 3rd statement "device = *wdctrl" as device=C:\WINDOWS\SYSTEM\CL32W.386 2.4 Finally, you get following new statements 32BitDiskAccess=ON device=*int13 device=*C:\WINDOWS\SYSTEM\CL32W.386 2.5 Save the modified SYSTEM.INI file in your working disk drive. 3. Start up WINDOW again. The ENHANCED IDE DRIVER will be automatically installed in your system. You then work normally.